Foam Swabs 101: Everything You Need to Know About Foam Tipped Applicators

Foam swabs are a better solution for critical industries like cleanroom, medical device assembly, PCB assembly, and electronic manufacturing. Most people view swabs as common cotton fiber wrapped on a stick.

However, while cotton is commonly used, Foam applicator swabs are also used by technicians to perform meticulous tasks like repair, precision cleaning, and assembly.

Made of polyurethane foam, these swabs are open-celled foam that contains 100 pores per every square inch.

The pore-and-open-cell structure makes the foam swab extremely effective in trapping particles. Additionally, they thermally bonded, non-abrasive, and durable.

You can also use them with most cleaning compounds and organic compounds. Available in a wide range of sizes and shapes, which means there is swab for every cleaning application.

More Cleaning Power

Excellent Cleaning Capabilities

Foam swabs have great cleaning properties than cotton swabs. The foam swabs have ESD-safe handles that are thermally bonded and help prevent separation during use.

Another advantage of thermal bonding is that it eliminates the usage of contaminating adhesives, sprays, and coatings. Foam is free from amides, silicones, and DOP, which makes them compatible with most cleaning solvents.

Some foam applicators are even compatible with acetone.

Puritan Foam Swab, Round Tip, 5″, Polypropylene Shaft

Gentle for Delicate Surfaces

From cleaning printed circuit boards (PCB) assemblies to delicate CD’s, these swabs are soft and have low abrasion to protect delicate components.

PurSwab ESD Foam Pointed Tip Swab, 3″, Polypropylene Shaft

Uses of Foam Tipped Applicators

There are several areas in various environments that need to be cleaned regularly. However, most places are delicate or hard to reach, and most cleaning tools are either too large or cumbersome for the job.

Most people and businesses turn to foam tipped swabs for effective and precise cleaning.

Foam swabs are soft and non-abrasive, which makes them safe for use even in the most sensitive areas. This type of swabs also features thermal bonding, which helps prevent contamination.

They are not only soft for gentle cleaning, but also sturdy to avoid flexing, folding, and bending during regular use. You can also use them when they are wet or dry.

Puritan Foam Swab, Mini-Paddle Tip, 3″, Polypropylene Shaft

Removing Contaminants in Manufacturing Environments

If you produce pharmaceuticals, it’s important that your manufacturing environment remains free of any contaminants. Biological contaminants such as pathogens are often introduced by operators.

Fungi and mold may also develop or introduced during processing. Other contaminants include debris that may be introduced when handling some components like metal, fiber, glass pieces, lubricants, and plastic particles.

The best way to keep your pharmaceutical manufacturing environment clean is by using single-use foam tipped swabs.

Because they are only used once, you won’t have to worry about transferring contaminants to other surfaces.

Thanks to their low lint and super-absorbency properties, the swabs will clean all surfaces and equipment of industrial and biological contaminants without causing further issues.

Cleaning swabs for Printer cleaning and maintenance

Clog build up can damage your printer or ruin your work. However, you can use foam swabs to clean the capping stations, wiper blades, and printer heads during routine maintenance.

Unlike cotton swabs, soft foam tip swabs will leave no residue. Plus, they contain no contaminating adhesives.

Use the right foam printer cleaning swabs to maintain your equipment for clean and crisp images and avoid ink splotching and poor performance.

CleanTex Large Paddle Tip Foam Swab, Polypropylene Shaft, 100/bag

Precision cleaning with foam cleanroom swabs

While cotton swabs are more economical, when it comes to more precision cleaning, foam swabs are ideal, especially where lint should be avoided.

You can easily pair these swabs with disinfectants and cleaning fluids for unique applications.

Additionally, these swabs come in different sizes; they can be as small as 1.7mm with handles as short as 50mm or as long as 2.5 meters.

Tekniswab Conical Tip Foam Swab, 3″, Polypropylene Shaft, 500/bag

Foam gun cleaning swabs

Are you a gun enthusiast? You will want to keep your gun clean. Foam tip swabs are engineered to clean the action areas of your gun.

These swabs are lint-free and non-abrasive, washable and somewhat reusable during the same cleaning session.

Additionally, they are made in different sizes to make it easy to clean the rails, crowns, slides, trigger assemblies, and other hard to reach areas. These swabs have bendable handles that won’t easily break or splinter.

Puritan Cylindrical Tip Foam Swab, 2.7″, Polypropylene Shaft

Where to buy?

Are you in the market for the best swab that can help you reach those hard-to-reach areas? Depending on the area you want to clean, there are many different sizes and shapes available at Harmony.

Choose from Chemtonics, CleanTex, Coventry, Puritan Medical Products and Teknipure.

To start cleaning today, visit Foam Swabs at Harmony and see the broad assortment for your particular use.

foam swabs

Waffletechnology® Cleaning Cards: Everything You Need to Know

Unique Waffletechnology Cleans better than traditional flat cards.

Waffletechnology® by KICTeam is the king in cleaning cards technology worldwide. Regular use of card cleaners can eliminate the frustration of card failure due to a dirty card reader.

Waffletechnology® cleaning cards to prevent expensive maintenance, replacement cost, and reducing the results of failed transaction on your card; this ensures total efficiency and reliability to your customers. This product is designed to give you a five-star level unmatched cleanness of your card reader.

How do Waffletechnology® Cleaning Cards work?

You can place your bet on Waffletechnology® cleaning cards since they are engineered to flexibly assimilate dirt from the raised platform on both top and bottom surfaces. The cleaning platforms are basically loaded with springs, to increase the pressure significantly to the internal components as the card is passing through the mechanism.

When the cleaning pressure is increased the platforms springs up on the surface to clean the adjourned sensors, as well as cleaning thoroughly the leading and trailing surfaces surrounding the optical lenses.

Flat cleaning cards cannot clean the optical lenses perfectly since they do not touch the recessed sensors and at best they can only come into contact with tip if the convex tip. The engineering behind Waffletechnology® cleaning card is designed not to be flat, thus thoroughly cleaning all the sensors.

How to handle Waffletechnology® Cleaning Cards

Due to environmental conditions and a increased number of user’s transaction, devices gather a lot of dust, paper flash, oils, dirt and small sand particles that can cause your devices to underperform or fail.

Waffletechnology® works hand in hand with OEM to design products to clean their devices such as:

  • Card readers
  • Check scanners
  • Thermal printers
  • Currency counters
  • MICR or check readers
  • Bill acceptors

Cleaning a Card Reader with a Cleaning Card:

There are many types of card readers today such as EMV smart cards which can be either chip readers or pin readers, credit card reads and debit card readers, mobile payment methods and security control access doors to homes or lodging door locks.
The use of cleaning cards once in a week helps avoid card malfunction.

Risks of not cleaning your Card reader

  • Increased customer embarrassment because the reader fails to read the card properly.
  • Increased number of slower transactions and long lines that will frustrate your customers; this can cause your customers to look for better same services in other places.
  • Increased transaction fees and fraud due to manual entry.
  • Higher cost for maintenance services or exchange of your device
  • Poor first impression to your customers.

Cleaning Check Scanners:

This is a device used in banks and offices that process their payments by check internally. Use of cleaning cards helps remove dirt from lenses, check paths and, rollers leaving the device in perfect condition.

Check Scanner Cleaning Cards are used to remove sand particles oils that accumulate during normal operations in a day. The device requires to be cleaned after 2000, scans or once in a week to maintain credibility.

Effects of not cleaning your check scanners

  • Mis-Reads because of poor image quality.
  • Checks jamming.
  • Increased cost of maintenance.
  • Panic repair attempts.

Cleaning Thermal Printers:

Thermal printer can accumulate paper flash and label residue with each use.  This can cause more errors on your print on your print material as well as jams.
Using Waffletechnology® cleaning card to clean the print head and platen rollers regularly increases the life of your printer and reduces down time.

Risks of not cleaning your Thermal printer:

  • Reduce the life of your print head.
  • It can cause printing of faded receipts or poor barcodes prints.
  • Reprints and wasted labels or paper.
  • Increased cost of maintenance
  • Multiple self-troubleshooting attempts which could damage your printer

Cleaning Currency Counter Machines:

Did you know that money is dirty?  Currency leaves oil and soil particles in the device during normal operation. The accumulating dirt can cause rollers to slip and the sensors to fail.

It is wise to use Waffletechnology® cleaning cards to clean the device quickly and effectively.

Risks of not cleaning your Currency Counter Machines:

  • High and hidden service cost.
  • High cost of repairs.
  • Counting errors which can be costly.

Cleaning MICR or Check Reader Machine:

MICR use magnetic heads to read and determine the coded account number and bank routine number on a check. During normal operations the device can accumulate contaminants such dirt which can cause read errors.

Risk of not cleaning your MICR or Check Reader Machine:

  • Increased labor cost to research poor images.
  • Read errors and increased cases of jamming.

Cleaning Bill Acceptors:

Waffletechnology Cash Acceptor Cleaning Cards, 15/Box
Waffletechnology MICR / Check Reader Cleaning Card, 15/box
Unique Waffletechnology Cleans better than traditional flat cards.

Bill acceptors determines paper currency by use optical lenses and magnetic sensors. There are many models bill acceptors such as banknotes acceptors, self-checkouts, payment kiosk, bill validators, ATM deposit and counterfeit detectors.

Risks of not cleaning  your Bill Acceptor:

  • Customer lose confidence in your machine due to preventative maintenance issues.
  • Lost Sales because the machine will not accept the currency.
  • High cost of equipment replacement and parts and service expenses

Waffletechnology® Cleaning Cards Verdict

Regular use of cleaning cards using Waffletechnology® will result in increased sales, productivity, customer satisfaction and profits.  The benefits of regular maintenance using a cleaning card far out weight the costs.